Upgrade & lighting enclosure FLASHFORGE ADVENTURER 5M
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade enclosure FLASHFORGE ADVENTURER 5M, lighting
- Ocena
- 0 / 5
- Polubienia
- 70
- Pobrania
- 372
- Wydruki
- 0
- Wyświetlenia
- 5485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A button with a lock was inserted into the camera casing, taken from the site, to turn on the backlight from the front panel. A channel for wiring is made along the inner wall. (panels B and C)
In panel D, the outer corner is cut off to reduce the bending of the bar feed tube when the coil is suspended at the top.In panel D, the outer corner is cut off to reduce the bending of the bar feed tube when the coil is suspended at the top.
In the remix of the coil suspension rod, the filament termination sensor is slightly rotated towards the input hole for the panel D bar for its easier entry.