OmniStand Top Mount Filament Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a filament guide designed to fit over the OmniStand Top Mount Spool Stand created by @BaronWilliams. The…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a filament guide designed to fit over the OmniStand Top Mount Spool Stand created by @BaronWilliams.
The original spool stand is here:
http://www.thingiverse.com/thing:704631
I would suggest rotating the STL Y-axis 180 degrees and printing it so that the majority of the guide is on the print bed (see image). If done correctly, the only part off the print-bed and maybe requiring supports is the small, rectangular box which fits over the spool stand.
Print Settings
Printer Brand:
FlashForge
Printer:
FlashForge Creator Pro
No
Supports:
Yes
0.2
Infill:
20%
Notes:
You can print at whatever infill you wish, but I chose 20% as it does need some "solidity" in order to withstand the tugging from the extruder head as it tries to pull more filament off the spool.
I do suggest using supports under the angled rectangular mount box (after flipping the STL Y-axis 180 deg).
How I Designed This
I used OnShape to design this armature.
Category: 3D Printer Accessories