FiiO E10K Desk Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple desk stand for the FiiO E10K!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I really liked hellobritt's Under Desk Mount for the FiiO E10K, but I wanted it to be on the desk, so I created this simple remix in PrusaSlicer 2.8.0. Just load the .3mf file into the sIicer and get to printing (or change the parameters to suit your needs)!
I don't know how well it will work with other slicers or other versions of PrusaSlicer.
I attached 10mm silicone anti-slip feet on the corners to prevent it from sliding around (there are no guide-holes/divots for positioning the feet). See photo 6 to see where I attached them.
I recommend printing it with the back-side facing the print bed in order to avoid having to use supports.
Furthermore, I used the concentric pattern for the top layers to make the “leg” look better.
Note: You will need to remove the silicone feet that came with the E10K in case you've attached them, otherwise it won't fit!
Don't mind the two cubes on the foot in the preview! They are supposed to be negative volumes. If they aren't, just change their type to negative volume.