Faux Security Camera - Body + Mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a file that I made for an art piece called 'A Scanner Darkly', where these fake security cameras read off text…
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 252
- Wydruki
- 0
- Wyświetlenia
- 1429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
This is a file that I made for an art piece called 'A Scanner Darkly', where these fake security cameras read off text via spotlights inside the body of the security camera.
Take em, make em, show me how they're remixed!
These pieces were made to be easily printable, assemble by slot together, and the provided .step file should allow you to easily modify it to allow for wire pass-through. If your prints are watertight, the lid should provide a good measure of protection from the weather as well. In addition, there's a recess in the window at the front of the lid to attach a piece of acrylic.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
Filament:
[
Atomic Filament PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Atomic+Filament+PLA&tag=thingiverse09-20) Post-Printing
Assembly Hardware -
- x1 - 1/4-20 Hex bolt - at least 3/4" long x1 - 1/4-20 nut x1 - 1/4 washer x1 - m5 x 35mm+ flathead screw x1 - m5 hex nut You'll need a 1/4-20 hex bolt to slot into the pan-tilt bracket, along with a nut and a washer.
I used a 1/4-20 x 3/4" bold with a washer and an acorn nut to give the piece a finished look.
Also sorry / not sorry for mixing metric and imperial. Chaos reigns.
Category: Sculptures