1 / 4
Adhesive Mount 100mm VESA Adapter — zdjęcie 1
1 / 4

Adhesive Mount 100mm VESA Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I printed this in PETG and attached it to the monitor with construction adhesive and foam tape. To mount it I used x4…

Ocena
0 / 5
Polubienia
5
Pobrania
111
Wydruki
0
Wyświetlenia
1087
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

I printed this in PETG and attached it to the monitor with construction adhesive and foam tape. To mount it I used x4 M5x12mm threaded brass inserts.

My print wasnt quite complete (thus the exposed infill) but the settings were overkill to begin with. I'd suggest at least 4 perimeters + a couple extra bottom layers to ensure a solid base to attach to.

I'd tested the connection before mounting this monitor to ensure the frame was rigid enough to support its weight from the new connection point. Before attaching your 240hz 8k monitor that costs more than my car I'd suggest you do the same. Better yet, buy a monitor with a built in VESA mount.

Category: Computer

Tagi