Collapsible Cup Holder Spike (print-in-place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep the sand out of your soda.
- Ocena
- 5 / 5
- Polubienia
- 1120
- Pobrania
- 2280
- Wydruki
- 14
- Wyświetlenia
- 12 731
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Keep your beverage well above the sand and dirt with this collapsible cup holder spike. The pointy end presses easily into sand or soft earth. Each section has a screw thread at the end so that as you extend each inner section, it can be screwed into the previous section to form a rigid connection. You can also leave some sections un-extended for using with low-rider beach chairs.
Sized for cans and bottles up to 75mm dia., and it also flares at the top for cups. It can be re-scaled in X and Y for larger diameter containers. Stands 570mm tall, with an additional 150mm for the spike.
Printed in PLA with 0.2mm layers. Other materials should work as well.