Layer Adhesion Test Delamination Bending Test / Benchmark
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Layer Adhesion Test
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
When I build prototypes using FDM, I sometimes experience delamination and breakage of my 3D-printed parts. It is not always possible to rotate the part to optimize strength, which can lead to adhesion and delamination issues.
I have found it challenging to find a reliable test to measure delamination. Therefore, I developed this test model. It might not be the most advanced, but it provides a sense of the material's "brittleness." The project is still under development.
To test the materials, I print 3-5 test rods of each material and compare them to gain a better understanding of their properties. I hope this model can help others in similar situations to improve their prototypes and avoid delamination problems.