Ryobi 18V PCL946 Soldering Iron Cleaning Sponge Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounted-on carrier that holds a wet sponge for cleaning the soldering tip
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
You always need some way to clean the soldering tip. This mount onto the soldering iron and provides a stable way to clean the tip. It holds on with a 5mm hex head screw that presses into the knob. I used 3D Fuel Lulzbot Green filament, Ender 3 with PEI plate, 0.20 layer, 20 to 25% infill, 3 walls, no support or additional adhesion. The sponge, that is cut in half, can be found at a dollar store or department store.
I also have a solder and spare tip holder. Ryobi P3105 Solder Holder (Now with tip holder) by JEO | Download free STL model | Printables.com