1 / 3
Radius gauges 1-10mm & 11-30mm (.3MF > .STL Conversion)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
.3MF file broken down into .STL files and re-uploaded for those who run into compatibility issues with .3MF format.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Original descriptions per Jaha:
[1mm-10mm]
Radius gauge for measuring inner and outer fillets from different parts.
Assembly:
For Metric:
- 2x M4x25 Countersunk screw
- 2x M4 nut (Nyloc preferred)
Lazy way:
- Key ring or string to hold everything together
Printing:
- 0,2mm first layer
- Rest 0.15mm
- Use brim for the smallest, if the tip does not stick properly. Bigger one should be fine
[11mm-30mm]
Radius gauge for measuring inner and outer radius from objects.
Assembly:
For Metric:
- 2x M4x25 Flathead screw
- 2x M4 nut (Nyloc preferred)
Lazy way:
- Key ring or string to hold everything together
Printing:
- 0,2mm first layer
- Rest 0,15mm
- Use brim, if problems, for me it was fine without