Meshtastic Heltec Vision Master E213 Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the enclosure for Heltec Vision Master E213. It has an eInk screen of size 2.13 Inch
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 283
- Wydruki
- 2
- Wyświetlenia
- 2009
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
******Remark (updated on 29 Nov 2025).
There are two “versions” of the Heltec E213 board. Though not officially indicated by Heltec, i start to notice this when users feedback that the type C port positions are different since sometime in 2025.
You need to identify your version by referring to the photo below. Do not refer to the version number printed on the board . Rather, use the photo below. Then choose the right STL file for the bottom case.
You will need:
- 1 Unit of Heltec Vision Master E213
Buy at https://s.click.aliexpress.com/e/_DFsPd6j
(In my order, the seller did not ship with with an SMA Antenna, though they gave a small internal antenna. So you need to buy separately an SMA Antenna)
- 1 Unit of SMA Antenna (choose based on your frequency and preferred length)
915 MHz or 868 MHz
https://s.click.aliexpress.com/e/_DlHbccL
433 Mhz
https://s.click.aliexpress.com/e/_DnqeKrh
- 1 Unit of IPEX to SMA-K Connector
https://s.click.aliexpress.com/e/_DDUE3IF
Choose IPEX to SMA-K ( 5 cm or 8 cm)
-1 Unit of battery
I use a MakerFocus 1000 mAh Battery (dimension 44 mm x 26 mm x 10 mm).
You can use MakerFocus 1100 mAh Battery
- 3D Printed Parts
- 1 Top Cover
- 1 Bottom
- 1 Set of 3 Buttons
Please print accordingly to the suggested minimum infill.
Recommended to use Good quality PLA or PLA+. Poor quality materials are likely easily lead to breakage. I use both Creality and Sunlu PLA+
Printing Support may be required depending on your printing speed or printer (see examples below)
View step by step video on how to install the printed parts below
The screen display need to be configured to flipped as follows
Go to Web or Phone App > Config > Radio Config > Display > Flip Screen > On
Bottom Tray
Top Cover Printing Orientation
For personal use only.
------------------------------------------------------------------------------------------
These models are intended for personal use only.
Do not copy, sell, trade or gain from these files and designs.
This means you can print for yourself, for your family members, friends and make the devices and give away the printed enclosures for free to them to built the Meshtastic community but cannot gain financially from the sales of them.
Do consider contributing to the Meshtastic Community at https://meshtastic.org/docs/contributing/#supporting-and-contributing-to-meshtastic