Stronger bolts, threadless arms. and double threaded arms.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Split the bolts down the middle and printed flat. Also made an arm with no threads and one with threads on both sides.
- Ocena
- 5 / 5
- Polubienia
- 122
- Pobrania
- 456
- Wydruki
- 3
- Wyświetlenia
- 2773
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Because I wanted to be about to chain the arm segments together via 2 arms > 1 arm > 2 arms > etc. I created a threadless arm to let the bolts pass through and let me chain these infinitely without ending up with some joints having two threaded ends (This makes tightening a mess).
Also, glue the bolts together. Dry fit them first to make sure you are not accidentally glue two of the same side of a bolt (when printing multiple).
Why did I do this? What purpose? Pfft, what good is robot-like arm if not biggest robot-like arm?