Analogue Pocket HSW Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clean mount for the Analogue Pocket which fits in the HSW.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Analogue Pocket Holder for Honeycomb Storage Wall
Enhance your retro gaming setup with this modified Analogue Pocket holder, specifically adjusted to fit seamlessly into the Honeycomb Storage Wall system. This model offers a sleek and secure way to display and store your Analogue Pocket, perfectly integrating with the hexagonal pattern of the Honeycomb Storage Wall. Make sure the inserts fit tightly to prevent it from falling off!
Printing Recommendations:
- Material: PETG recommended for durability and ease of printing (PLA should also work)
- Layer Height: 0.2 mm for a good balance of detail and print time.
- Infill: 100%
- Supports: Minimal supports needed; primarily around the HSW inserts.
Usage: Perfect for retro gaming enthusiasts looking to showcase their Analogue Pocket in a unique and stylish way. Whether you’re organizing your gaming room or creating a display wall, this holder is a functional and visually appealing addition to your Honeycomb Storage Wall setup.
Download now and print your own Analogue Pocket holder to bring a touch of nostalgia to your modern storage system!
Tip: Use the same settings (nozzle size, layer height, filament) as for the HSW to ensure a good fit.