APTP - Wall Mounted Toilet Paper Holder Helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helper for toilet paper holders
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
When my company recently moved into a new building the toilet paper holders were really attractive. However they had a practical problem.
The installed holder holds two rolls of paper. The weight of two full rolls of paper held the rolls against the wall as the arm pivots on the wall mount. This put friction on the roll so that you could not unroll it easily.
I created a "helper" that clips onto the arm and holds it off the wall so that the roll rolls freely.
I have included a photo of a similar non-commercial version of the holder in case you may have something like this at home and could use it.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.4mm nozzle, 0.2mm layers
Infill:
40%
Notes:
I like natural PETG as shown in the photo but you can pick whatever color goes with your decor and holder. In the photo where it has been installed I used blue PETG.
Category: Bathroom