CocaCola Led Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its a design of cocacola logo using two colores printed on the samelayer. Then you could add a 5v led inside
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Here's a quick design for a CocaCola logo with two colors on the same layer. Start by printing the Cocacola Face; for this one you need to Right click on printing plate and “select all your models” and again right click on “Group models”, then you will be able to let the design in the potiton that you want. then you ungroup the models and delete the external part of the cocacola letter and print that in white, then undo the delete and print and let only the external part, switch the filament to Red and print the rest of the design.
layer height 0.2
Remember to enable the jump in z in the retraction configuration, and let it at 0.4
remember to let the design at a corner so the cr touch doesn't hit the white print or you could also configurate your gcode so the printer does'nt initialize doing the leveling for the red part.