Two Lidded Compartments Pinecil Magnetic Rugged Box Top Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix magnetic top insert for Pinecil rugged box with 2 magnetic lidded compartments. Only tested on pinecil short tips.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 503
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
NOTE: My pictures are missing the 8x1.5mm magnet used to secure the soldering stand. This remix is still compatible with that magnet, mine just hasn't come in the mail yet.
A remix magnetic top insert for Pinecil rugged box with two magnetic lidded compartments instead of a longer tip storage area. Only compatible with short tips. Pictured are Pinecil short tips.
I also added a retaining wall so that the Soldering tips don't slide around. I only tested this with Pinecil short tips. I don't know if it works with any other tips.
I use the smaller lidded compartment to store heat set insert tips.
Uses the same magnets as the other compartment for both the compartment and lids. That means that in addition to the hardware listed on the original model you will need:
- Small Lid - 4x 5x1mm round neodymium magnets
- Small Compartment - 4x 4x2mm round neodymium magnets
No supports are required but the lid handle might come out a little rough without them. I printed at .20 layer height in PLA.
Magnet holes are supposed to be press-fit but some glue may be needed.
Get the other files and additional information from the original model that I remixed this from: https://www.printables.com/model/479937-ts101-rugged-box-magnetic-version