1 / 4
Nautilus Filament Clip - Vacuum bag safe — zdjęcie 1
1 / 4

Nautilus Filament Clip - Vacuum bag safe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nice large hole, so it slides easily over the filament and a satisfying locking click.

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
1
Wyświetlenia
107
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

A very simple but highly effective filament clip.

I wanted something that was free to move easily around the filament as it printed, holds the filament securely, vacuum bag safe, and was cheap and easy to make.

The result, the Nautilus Filament Clip.

They are basically solid plastic, so use the PLA of your choice, PETG will work too, but PLA is better.

They run freely around the filament due to the large 2.5mm hole and grip tight with a satisfying click as the filament locks in.

Print them in batches, the bed adhesion on my Prusa XL is good enough at normal PLA settings (60C) and they are quick and easy.

Nothing fancy, just nice easy to use clips that are vacuum bag safe.

The key, is the straight mouth, leading to the slightly larger gap at the back, the plastic flexes enough to hold them in, while working well. Been using them for a while (a few weeks) before posting to make sure they lasted.

Tagi