Link Catcher Mk1 for MHP Arms LMG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2-piece link catcher mount that slides onto 2 partially-unscrewed M3 screws on the Side Plate R.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 71
- Wydruki
- 2
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Parts List:
- x4 10mm M3 screws (to hold Mounting Plate and Bag Mount parts together)
- x4 4mm M3 screws (to hold the mesh bag to the Bag Mount, maximum of x8 4mm M3 screws can be used)
Made to help with cleanup when using the MHP Arms LMG. No changes to base LMG parts needed. Slides on and off two screws on the Side Plate R part that are backed out around 4mm (see picture below for which screws). Make sure the channels on the back of the Mounting plate don't have any support left over that can cause friction when sliding the mount on and off. STEP file is included to help with any changes for specific bags being used.
Printed in 3D-Fuel Brightest White PLA on an Ender Neo V1 with:
0.25mm layer height
4 walls
supports everywhere (may not be needed if your printer is good at overhangs)
15% infill with Tri-Hexagon pattern.
