1 / 2
SW: Armada Speed Dial
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Basic speed dial tool for Star Wars Armada
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my version of the Star Wars Armada Speed dial tool. This tool consists of 4 pieces:
- The top of the dial
- The center of the dial
- The top center cap
- The bottom center cap
This was printed on a Creality Harlot One using Elegoo Plant-based photopolymer resin (Grey)
Construction:
Requires super glue!
- Use your preferred super glue and place a small amount inside the center of the “top_center_cap” then place to the side.
- Take the “top_dial” and place is on top of the “center_dial”. Hold them together like a sandwich! Make sure the holes of the “top_dial” and "center_dial" are aligned
- Take the pre-glued “top center cap” and placed in into the center of the "top_dial" and “center_dial” sandwich.
- Lastly, place the “bottom_center_cap” into the pre-glued “top_center_cap” and hold for a few seconds
- Done!