Battery Door fix for Nikon Coolpix 990
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and somewhat elegant fix for the notoriously fragile Nikon Coolpix 990 battery door.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Easy print, works well. Print with largest surface facing down.
A single twist of the D screw allows you to twist the print and open the battery door, no need to disassemble completely.
Other materials used:
- ¼" Camera screw with D ring.
+ other screws will work up to a max diameter of 17mm on the screw head.
+ 10mm thread length
- M8 ring with 16mm outside diameter, 1.4mm thick
Settings/print info on example:
- Printed on an Ender3v2.
- .4 mm nozzle. Smallest surface is 1mm wide, adjust accordingly.
- .2 mm layer height.
- PCTG (not a typo, awesome filament). Avoid PLA if you use the camera on sunny destinations.
- 3 walls, 3 top and bottom layers.
- 30% infill.
- hilbert curve surfaces.
Example in pictures is definitely a lot stronger than needed, unable to break by hand on the weakest part.
Thinking about designing a carry case for the camera and the complementary WC-E63 Wide angle converter and maybe some CF cards. Let me know if interested.