Working Bevel Gear - Example
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A example of a bevel gear, and how it works
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a example of a bevel gear, and 3d printers can print small ones that work.
I would recommend printing at a low resolution and the Main parts Separately.
Print the Gears Separately, 1 at a time/
You can print the shafts, or you can use toothpicks as they are stronger, and easier to work with.
Print the shafts upright with a brim, as it will stick to the bed easier
The TPU is for a type of spacer, using it for its ability to fit with no spacing between parts - usual is 0.2 mm
You can also use tape if you don't have TPU, but use small strips
For instructions, view the cross section of the design I have attached
There is a larger spacer named Spacer - 2, for the gears to mesh properly
There is a longer shaft, which isn't necessary, you can use the smaller one for both gears, if you would like you can.