S-hooks with varying diameters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple S-hooks with varying inner diameters ranging from 10-30mm. These hooks are tested to support 10kg.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
These versatile S-hooks can be used throughout the household, featuring varying inner diameters ranging from 10mm to 30mm. Designed to comfortably support up to 10kg, these hooks are both functional and lightweight.
The smallest hook requires only 5g of material and can be printed in under 15 minutes. Meanwhile, the largest hook consumes 11g and can be printed in less than 30 minutes.
Also check out my asymetric S-hook design. https://www.printables.com/model/949787-s-hooks-asymmetric-with-varying-inner-diameters
I’ve thoroughly tested all designs using both PLA and PETG materials, and they reliably carry 10kg weight without issue.
Print settings:
- Layer height: 0.2mm
- Line width: 0.4mm
- 7 walls (ensuring a 100% solid hook)
- No support needed