Mario power-up dislpay (Glow in the dark)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple stand with 3 famous Mario powerups. Works really well with glow-in-the-dark filament!
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
I created this model for my son, he loves Super Mario! If you like, you can make the powerup parts color-accurate and multi-color. But I chose to print it with glow-in-the-dark filament, so my son has a nice little light when he goes to sleep. It was really fun to make!
Printing the base is quite straight forward. you need the print the stand twice (left and right). No support needed.
For the powerups, a brim is recommended due to the small / thin parts. I had a few failures on the mushroom, so I lowered the print speed quite a bit. Slow and steady does the trick.
Tolerances can be a bit tight, I needed to file off a tiny bit of the edges of the powerups. When printing on a Prusa Mini+ you can scale the model to 75%