Insect Water Station (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A water station with a standard bottle as reservoir for all sorts of insects/arachnids/... .
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 125
- Wydruki
- 1
- Wyświetlenia
- 717
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
With the increasing temperatures of the world, insects find fewer water sources than ever. To help them, you can do as little as putting some stones in a container with water for them to be able to drink without drowning. It works but requires refilling the water frequently, to alleviate this problem I found out there exist solutions (Bee oasis / Hydro Station / Bee water stations / … ) with a reservoir:
My model aimed at making a similar product easily 3dprintable and using common PET bottles as reservoir to recycle at the same time.
The model allows for the insects/arachnids/… to stand onto little pads and to drink the water that flows throught the channels around them.
Printing Information:
- Since this model will be exposed to the elements and will contain water you should use a non porous, uv resistant filaments like PETG or ASA. I recommend PETG as it is safer (similar to PET bottles plastic).
- To avoid poisoning the insects you should also thoroughly clean the model to remove any contaminants leftover from the 3dprinting process. You also can use a food-safe resin to coat the model for optimal protection.