Trash bin for Ender 3 V3 core XZ
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here goes the trash bin i designed for my Ender 3V3 core XZ. Printed in PLA, 0.25mm height, 0.4mm nozzle.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 170
- Wydruki
- 2
- Wyświetlenia
- 851
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Here goes the trash bin i designed for my Ender 3V3 core XZ. Printed in PLA, 0.25mm height, 0.4mm nozzle. I used 2 wood screws(2.5x11mm) to attach the back side bar and some carpet tape to stick it on the front of the chassis.The bin itself is on a slide to the base, so you can empty it without a problem.Originally made a bar for the front of the shassis as well, but it got too thick and was touching the hot-end in positioning, so i removed it and put double-sided carpet tape to hold it, works just fine.The base plate needs tiny supports, it's in correct orientation.