Aunt Inna Planter and Basin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ancient pot/jug stylized planter and high capacity basin
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a planter stylized as an ancient pot or jug, with a high capacity basin to prevent water spilage when watering. I made the design for my aunt Inna's 85'th birthday, hence the name of the model. Unfortunately I didn't take a picture of the printed planter and basin so I can't add them here, but this was printed and it does work.
Material: ABS is most advised if planter and basin will be put outside or in direct sun light. PETG may also work, didn't try. DO NOT use PLA, it seems to twist within few weeks (and is known to be sesitive to UV light.
I printed with a 0.4 nozzle, with a layer-height of 0.3, but I believe any nozzle size and layer-height should work. Personally i like the layer lines on the planter body since it makes it a bit like real (unglazed) ceramic pots. Though, heigher layers may increase contouring on the tops of the ears.
Use supports for the ears.