1 / 3
Hepafilter case for bentobox
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filter case for use in bento boxes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
- I wanted to use a bento box, but it was difficult to find a filter.
So, I made a case using only HEPA filter paper, which is relatively easy to obtain. - I'll leave a link to the products I used.
Please refer to it. - https://www.aliexpress.com/item/1005005861215996.html?spm=a2g0o.order_list.order_list_main.154.6c8b140f7FkKAi&gatewayAdapt=4itemAdapt
- This is a component.
- Use 4 spaces as shown in the picture.
- First, cut the length to match the size of the lower case. The length is approximately 80mm.
- Attach it to the groove of the case according to its shape.
- Push the upper case into place, fitting the shape to the end.
- Push it in completely as shown in the photo.
- Use it well.