Flange Type A/C Compressor Blanking Plugs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep dirt and debris out of your A/C compressor while the lines are off with these printable plugs.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Keeping dirt, debris and moisture out of your A/C compressor (and A/C system in general) is very important. If you don't have any suitable plugs at hand, you can 3D print your own and save some time and money (and potentially your A/C system).
The fitment has been verified on a Mitsubishi Outlander A/C Compressor, but it should work on most cars with this style plug.
Versions
15.5mm: The hole of the plug has a nominal diameter of 15.5mm
18.5mm: The hole of the plug has a nominal diameter of 18.5mm
Print Settings
- SEBS TPE is probably a better material choice for the plugs than TPU, because it won't be affected (as much) by the compressor oil.
- Three outer perimeters should be plenty to make the plug tight
- Depending on how well your printer is tuned, you might have to scale the model to guarantee a proper fit. It is designed with 0.3mm oversize.
Please consider liking and posting a make if you find this useful 🙂