1 / 8
Bambu Lab P1 magnetic light 4x G4 LED lamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use G4 12V LED modules to brighten up your BL P1 chamber - no screws, just 4 pcs 9x9x3 mm3 magnets
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are plenty of light mods for this printer, but most of them use LED strips. I had some G4 LED modules laying around and wanted to make use of them.
BOM:
- 4 pcs. 12V G4-size LED modules Ø23 mm (mine have 3W of power, more than enough),
- 4 pcs. 9 x 9 x 3 mm magnets (mine were sold as 10x10x3, turned out to be 9x9x2.7 in reality),
- external 12 V power supply matching power requirements of your LEDs,
- wires
I include source Fusion 360 file if you would like to adopt it to your needs. To change dimensions of LED or magnet holes, just go to Modify → User parameters and change the values.