1 / 5
Strahlregler für Regenwassertonne / Aerator for Rainwater Barrel — zdjęcie 1
1 / 5

Strahlregler für Regenwassertonne / Aerator for Rainwater Barrel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Strahlregler für den Wasserhahn der Regenwassertonne. / Aerator for the tap of the rainwater barrel.

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

(English below)

Spritzt bei dir das Wasser an der Regentonne auch immer neben die Gießkanne? Damit ist mit diesem Perlator jetzt Schluss und du sparst wertvolles Wasser.

 

 

Druckeinstellungen

  • Material: TPU
  • Perimeter: 5
  • massive Schicht oben: 0
  • massive Schicht Boden: 0
  • Fülldichte: 50-60% 
  • Füllmuster: Gitter
  • Stützen: keine

Achtung: Es ist wichtig, dass die unterste und die oberste Schicht auf Null gesetzt sind. Dadurch wird mit dem Infill das Gitter für den Perlator erzeugt.
 

English description

Does the water in your rain barrel always splash next to the watering can? This aerator puts an end to that and saves you valuable water.

Print settings

  • Material: TPU
  • Perimeter: 6
  • Solid layer top: 0
  • Solid layer bottom: 0
  • Infill density: 50-60% 
  • Infill pattern: grid
  • Supports: no

Note: It is important that the bottom and top layers are set to zero. This creates the grid by the infill for the aerator.

Tagi