1 / 10
Google indoor cam holder for Prusa original enclosure — zdjęcie 1
1 / 10

Google indoor cam holder for Prusa original enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Google indoor cam holder for Prusa original enclosure

Ocena
5 / 5
Polubienia
4
Pobrania
17
Wydruki
1
Wyświetlenia
114
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I use a google indoor cam to monitor my printer. I made a holder that eliminates the bulky original camera foot and bolts into the OEM Prusa enclosure.
It requires removing the 2, T8 torx screws from the cam base and you need to repurpose the shiny 5,5mm bolt (look at pictures). You'll also need 2* 12mm allen screws (again see pictures) that can be found in your spare parts bag ;-)

They just screw into the PETG model, no (more than strong enough!).
Intended to mount on the holes 1 row below the center holes (others don't fit).

Please post a make if you print it!  :-) 

Printer settings I used:

  • PETG
  • 15% infill
  • only supports at the camera mount required
  • 0,4mm nozzle
  • 0,2mm layer height
  • 3 perimeters

     

Tagi