Collapsible Earring Stand (expands 22mm to 85mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extending earring stand that collapses from 85mm to 22mm tall with 45mm diameter base - prints in under an hour
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This earring stand prints with a telescoping tower that is extends to 72.5 mm (overall height is 85mm extended) and collapses to 22 mm. Attach the interchangeable earring top (or something of your own design) to the 3.0 mm x 3.0 mm square hole at the top of the tower.
Perfect for jewelry photography in with limited space.
The telescoping tower segments are kept in place with a small bar that is part of the base. To separate after printing, from the bottom, gently press up on the segments on either side of the bar and they should pop loose. When collapsing, you may need to twist segments to get it down to the original size so that the bar lines up with the slot underneath. This is easiest with the earring arms attached.
Prints in under an hour.
Do not use supports!
Death Star earrings are available for download with my other jewelry at EcoDad's Jewelry Designs Collection by EcoDad | Printables.com.