Modular Cubby system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular cubby system for sterilite bins using 1/8” hardboard.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
My wife is a teacher, and she asked me to design some light-weight, inexpensive cubbies to hold her classroom sterilite bins.
These are designed to snap together with 1/8” thick hardboard, and can be adjusted to hold as many bins as you’d like by printing additional middle sections. They dovetail together for maximum modularity. Depth can be customized by the width of your hardboard sheets. For our bins, 13.7” allowed us to maximize hardboard usage, while making them deep enough for the bins.
I used a .8mm nozzle with .4mm layer height and elegoo PLA on my Neptune 4 Pro, but PETG is better for this application. I also printed some with a .6mm nozzle, but the .8 saves a lot of time when you’re doing a classroom set of 10 assemblies. No supports are needed, but the male dovetails may need a little cleanup without them.
For me, print time was 14 hours per set of 4 on my neptune 4pro. Total filament used was about 1kg per set of 4(16 slots total) At 100% infill.