1 / 6
Sovol SV07 Plus Screen mount *New 07/21/2024 — zdjęcie 1
1 / 6

Sovol SV07 Plus Screen mount *New 07/21/2024

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This mount adds some distance between screen and heated bed for better cooling. New iteration of my previous design.

Ocena
0 / 5
Polubienia
14
Pobrania
83
Wydruki
0
Wyświetlenia
448
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print in the orientation the file is saved in. I printed with Esun petg hs. 239 nozzle temp and 80 bed temp at 70mm/s. 2 walls and 20% infill and supports on to support the vent holes and the elongated hole for the side screw. It comes out nice and sturdy. New mount design keeps the lower screen angle of my prior design and just adds some distance between the edge of the heated bed and the screen and also some cooling holes for better cooling of the screen.

Tagi