1 / 2
Bed slat holder 50mm, pegs on 33mm pitch — zdjęcie 1
1 / 2

Bed slat holder 50mm, pegs on 33mm pitch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bed slat holder

Ocena
0 / 5
Polubienia
7
Pobrania
25
Wydruki
0
Wyświetlenia
177
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bedroom
Licencja
Creative Commons — Attribution

This bed slat holder is for 50x9mm slats.  Pegs are on 33mm pitch.

It's important to print in the STL orientation, otherwise the holder is likely to split on the layer lines.  Tree/organic support is recommended as it's easy to remove.  100% infill will strengthen the pegs.

Feel free to request other dimensions.