Super Action Stuff Footpegs and Stilleto Pegs for the Ultimate Weapons Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Footpegs for action figures compatible with the Ultimate Weapons Rack accessory
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 904
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
If you own the Super Action Stuff Ultimate Weapons Rack available here: https://a.co/d/6nbEmnT
These minimalist pegs allow you to stand and display your figures on the pegboard side of the rack. No more large figure stands taking up space, no more struggling to find that perfect balance point, you can use the weapons rack and the pegs to arrange your figures however you like in more dynamic poses and with less fear of figures shelf diving. Attain poses that you could only dream of doing without support.
There are two types in three sizes:
- Standard flat peg on the ground
- “Stilleto” style which is raised and at a 40 degree angle. This will allow you to do more dynamic poses such as running, walking and leaping.
Each peg comes in three different peg sizes, 3mm, 3.2mm and 3.6mm.
I've done some testing with various popular action figure lines and here is what fits with each, but note that even within the same lines, there is a lot of inconsistency, for example, Marvel Legends is usually consistent with 3.2mm pegs, but some figures have 3mm and others have larger holes.
3mm Foot pegs: Action Force/Valaverse, Diamond Select Lord of the Rings, Star Wars Black Series, Some Marvel Legends
3.2mm foot pegs: Some Marvel Legends, GI Joe Classified, Mythic Legions, Mcfarlane Toys, Jada Toys Street Fighter, Hasbro Indiana Jones, NECA, Hasbro Fortnite, Plunderlings, Power Rangers Lighting Collection, Sphero Toys Animal Kingdom, Mattel WWE, Ollie's NBA Starting Lineup
3.6mm Mezco ONE:12 Collective
There are for sure more that I have missed, if there are other lines that you have experimented with, such as the various Ninja Turtles lines, wrestling lines, Super7, etc. that are not listed, let me know what works.
Resin printing will get best results but FDM can also work with fine detail. The pegs on the stiletto can be fragile depending on what resin you use, please avoid bending them on the rack.
These prints are available for free, but not for resale unless approved by me directly. Please contact me directly if you are interested in selling these on your e-commerce store or in open markets on a direct to consumer basis, I have some parameters for use, but will not ask for payment.