Action button for iPhone 15 Pro PopSocket MagSafe case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds the missing Action button to the PopSocket iPhone 15 Pro MagSafe cases
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
PopSocket's iPhone 15 Pro MagSafe cases launched with a badly placed gap where there should have been an Action button. This makes using the iPhone's Action button very difficult, so here's the missing button to add to your case.
The button features a long thin strip to keep it in place, this should overlap the ‘volume up’ button slightly and has not shown to interfere with its operation on my print. You can of course trim this if preferred, but this design was the result of many tests on how to keep the button in place and still be usable.
The button is lower profile than the 2 volume buttons allowing easy distinction between button types but raised enough for ease of use.
I have only printed this with TPU, other filaments may be too stiff and perform sub-optimally.