Nespresso capsules in a conic coffee maker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed after a famous La Conica coffee maker. Takes 25 capsules (3x8 + 1).
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I've seen many designs for Nespresso capsule holders, but I decided to try my hand at creating a new one. As a satisfied owner of multiple Alessi coffee makers, I found inspiration in the iconic La Conica coffee maker.
This holder can store 25 standard Nespresso capsules, arranged in 3 rows of 8 capsules each, with an additional capsule on top reserved for Papa in our home.
The design fits within a standard 250x210 print area. I recommend downloading the 3MF file for the pads since they can be tricky to fit into the print area. Additionally, I suggest setting the infill at 38.9 degrees for optimal results.
I printed the holder using PLA and assembled it with CA glue.
Print the following five parts:
- conica_bottom.step
- conica_top.step
- and three times nespresso_track.3mf
Thank you for downloading and give it a like! :)