socketchanceover holder (stekker overloop houder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a holder for a chance over socket. Dit is een stekkerhouder van CE naar normaal.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Small update.
i made counter sinkholes for the wall mount screw's for easy mounting.
And a second type that you can hang the ones with a cord in between the two sockets.
it's a advise to print in 20% or 25% infill do to strength needed and petg or pla+ depends on where you hang it with in de caravan/camper/tenttrailer due to heat with pla+.
---------------------------------------------------------------------------
this is a holder for a chance over socket, i had one laying around in the caravan and was always looking for it so i made this model so that i can store it at my fixt place in the caravan.
infil does not realy mater i printed it at 15% and is sturdy.
pla+ or normal pla is good.