Meepo Snap-On Splash Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are front splash guards so when riding through puddles or gutters you won't get that nasty water sprayed at you…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
These are front splash guards so when riding through puddles or gutters you won't get that nasty water sprayed at you from the wheel rotation. I branded them with the Meepo Logo so you can make itI will work on some ones for the back also. I have also included a blank one just in case you want to keep it simple. I also created a wider logo so the printing goes smoother but if you are fine with the simple one that will work also.
Meepo
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Doesn't Matter
Supports:
No
normal or better
Infill:
20
Category: 3D Printing