Creality Runout Sensor Mount for Direct drive undermount spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket for mounting a Creality filament runout sensor using the old extruder mounting plate
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I have an Ender 5 Pro which onto which I have installed a Biqu H2 direct drive. I have a custom spoolholder mounted midway up the frame which feeds the filament up through a reverse bowden setup.
This bracket utilizes the old metal mounting bracket from the bowden extruder to mount the runout sensor to the top rail of the printer and has threads for an M6 bowden coupling.
You'll need:
The original extruder mounting plate
6x M3 heat-set inserts
4x M3x8 screws
2x M4x8 screws with 2020 nuts
A Creality runout sensor with 2 diagonal holes (not 4) with it's original M3 screws
M6 bowden coupling