Vaessen Motorsports VP-2 - DIY Sim Racing Pedals
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are a DIY pedal set using off the shelf components, 3d printed parts and laser cut profiles.
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 531
- Wydruki
- 1
- Wyświetlenia
- 3208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Introducing the Vaessen Motorsports VP-2, these are a long term project following on from the VP-1 pedal set I released. I liked that set, however it involved a lot of machining work which is not feasible for most DIY makers. I set out to re-design these to make them more accessible to a wider range of people, they now feature off the shelf parts with 3d printed and laser cut parts that are easily obtainable with online services. This now also includes a BOM and an assembly guide. These have a very similar feel to the original set.
These pedals give a good balance of high quality build on a budget, with a 200kg load cell you will not be lacking any brake force. The throttle uses a hall sensor to eliminate and potential wear. The brake uses cups over the elastomers to create a more progressive feel and to increase the longevity of the elastomers. They feature easy adjustment to suit your preferences. High quality and easy to use 16 bit Leo Bodnar electronics give a reliable experience.
Estimated cost for these pedals is around £300, the laser cut sections come to around £140, 3d printed parts £20, Leo Bodnar board £40 and the rest including fasteners/spring/load cell etc. £100. This is just a rough guide depending on where you buy your parts from this could be more or less to build.
I have also created an add-on for Simagic Haptics https://www.printables.com/model/1026026-vaessen-motorsports-vp-2-simagic-haptics-mount
paypal.me/msvprinting
*please note the assembly STEP file is mainly a guide for assembly if you get stuck, the STEP and STL folders will contain the latest revisions at all times
