Backpack Camera Clip Holder for Deuter / Smallrig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Backpack Camera Clip Holder for older Deuter backpack and Smallrig camera (L-)plates
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 754
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Another camera clip holder as the existing ones did not fit my old backpack and smallrig plate on the camera. The camera easily slides in from the side and can be released quickly. It holds onto the plastic clip of the chest strap and is secured by a 5mm cable tie.
I attached the model, so that it can be adapted to other camera plates or backpacks if needed. It needed some tweaking and has fixes for overextrusion in the corners of the dovetail till my smallrig plate fitted nicely.
Printed on Bambulab A1 in PETG with 0.4mm nozzle and 0.2 strength profile. Seam position on the back so they don't interfere with the dovetail. I used tree supports which worked very well.
Update: The camera release broke off after a while, so I split the part into 2 pieces that I glued together with CA. Now both parts can be printed in their ideal orientation and layer adhesion is not critical anymore.