Doppelzahnrad 124-127 für Bernardo P600G, Double gear 124-127 for Bernardo P600G
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Doppelzahnrad für zöllige Steigungen Double gear for imperial threads 15.5, 31 & 62 threads per inch.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Doppel-Zahnrad / Wechselzahnrad mit 124-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen.
Mit dem 124-127 Doppelzahnrad anstelle des originalen 120-127 und dem 32er Antriebsrad sind die Steigungen 31 & 62 Gänge pro Zoll möglich.
Mit dem 64er Zahnrad sind die Steigungen 31 & 15,5 Gänge pro Zoll möglich.
Hebelstellungen siehe Tabelle.
Müßte auch an baugleiche Modelle wie HBM 280x600, Paulimot PM 3700 oder Warco GH 600 passen.
Gedruckt mit Prusa MK4
PLA
3 bis 4 Perimeter
50 % infill
Position der Naht: zufällig
Achtung: Für einen paßgenauen Sitz muß die 14mm Bohrung mit einer 14 H7 Reibahle auf genaues Maß gebracht werden!!
Falls es jemand druckt und verwendet, bitte um Rückmeldung ob es auch wirklich an den anderen genannten Drehmaschinen paßt.
…………………………..
Double gear / change gear with 124-127 teeth for driving the feed gear on the Bernardo P600G lathe for cutting inch thread pitches.
With the 124-127 double gear instead of the original 120-127 and the 32 drive gear, the pitches 31 & 62 threads per inch are possible.
With the 64 gear, the pitches 31 & 15.5 threads per inch are possible.
See table for lever positions.
Should also fit identical models such as HBM 280x600, Paulimot PM 3700 or Warco GH 600.
Printed with Prusa MK4
PLA
3 to 4 perimeters
50% infill
Position of the seam: random
Please note: For a perfect fit, the 14mm hole must be brought to the exact size with a 14 H7 reamer!!
If anyone prints it and uses it, please let me know if it really fits on the other lathes mentioned.