Hula Sovol SV08 XtraH
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sovol SV08 Hula Adapter with additional height
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 122
- Wydruki
- 3
- Wyświetlenia
- 1825
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Hula Sovol SV08 Feed Adapter with extra height for Hula
Credits to the original project of ThrutheFrame who made the Hula Project. This models fits to the
Hula for Voron. Please read that manual for more informations.
Slicer Settings
• Wall loops/perimeter = 4
• Top layers = 4
• Bottom layers = 2
• Infill = 3D Honeycomb @ 15%
• Support not needed
Needed parts from the Hula for Voron Project by ThrutheFrame:
Build Plate 01 - TPU Air Pad
Build Plate 02 - TPU Dampener
Build Plate 06 - Insoles
Hula for Voron can be found at https://makerworld.com/en/models/417509#profileId-319901