Dwemer Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fanart recreation of the iconic Skyrim Dwemer Shield.
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 167
- Wydruki
- 1
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is one of the first 3d models I started when learning blender. I have finally bitten the bullet and decided to upload this file.
I haven't finished the paint job, however check out Silverrend Props inspiration on painting Dwemer items.
Within the split parts, outside of the Handle, Sphere and Sphere support, the below were some of the slicer settings
- Infill - 5%
- Layer height - 0.2mm
- Perimeters - 3
The handle was 50% infill, the Sphere was 15% and the Sphere support was 10%.
The overall height of the full size version of the shield is around
- Height - 94cm
- Width - 75cm
I used screenshots from the game of my character holding the shield and used that as reference to work out the above dimensions.
The dowel size used for the split parts is 19mm wooden dowels.
In the coming week, I will upload a PDF guide for the assembly.
For anyone that is curious, I am working on an Aetherium version, which should be ready in the next week.