Headphone Hanger | Thumbtack Mounted
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A headphone wall mount which uses thumbtacks to easily mount to the wall
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount for headphones which uses 3 standard thumbtacks to attach to the wall. I designed this because my lease doesn't allow us to screw into the walls or use command strips, but does allow us to use thumbtacks to attach things to the walls. Should fit most headphones, and has a second hook for you to put the cable. Prints with no supports.
After printing, carefully slide 3 thumbtacks into the slots on the back of the mount, and then push it onto the wall in your desired location. The thumbtacks should have a small amount of friction to prevent them from falling out while you position the mount, but this could vary depending on your printer's bridging capabilities and calibration.