1 / 2
iFlight Nazgul5 V3 FlyFishRC M10 Mini GPS Mount — zdjęcie 1
1 / 2

iFlight Nazgul5 V3 FlyFishRC M10 Mini GPS Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for FlyFishRC M10 Mini GPS compatible with iFlight Nazgul5 V3 drone frame

Ocena
0 / 5
Polubienia
5
Pobrania
36
Wydruki
0
Wyświetlenia
460
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Model made from:

Print Settings

 

Printer Brand:

Creality

Printer: K1C

Supports: No

Resolution: 0.2mm

Filament: Creality TPU 
 

slow speed like 20 mm/s
no z-hop
retraction speed 100 mm/s
retraction length 5mm

With the settings above I could print a nice model, without supports. In place of the overhang, a few threads fell, but after cutting them off, it was all good.

Tagi