Door handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a handle for a van sliding door, specifically for a Peugeot Expert III (2019 model). I can be used for any door.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 394
- Wydruki
- 6
- Wyświetlenia
- 1792
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a model I created based on Kristian Laholm explanations (https://www.youtube.com/watch?v=pQOb7jspSJY).
I specifically design this to be used inside my Peugeot Expert 3, on the sliding door. However, it can be used on normal door as well..
On the sliding door of a Peugeot Expert 2019, there are two M6 inserts. I design the handle to take two M6 screws with countersunk head.
I printed mine in PLA at 0.15mm layers with a 40% infill. This is not designed to be a structural piece, but to help closing and opening the door from the inside. The PLA hasn't suffer from the heat yet, but printing in PETG or other material is possible.