Nextion 5" case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A back case to match the bezel from the Nextion official Web page.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 148
- Wydruki
- 0
- Wyświetlenia
- 679
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A friend had a Nextion 5" display which I offered to print a case for, all I could find suitable was the bezel from their Web page so created a back case in Fusion 360 and this is the result. As mentioned elsewhere the bezel doesn't print well, I had to use a Brim when I did it. The model number for his PCB is NX8048K050_011 if that is of relevance.
My case prints well there is a 5mm hole for the wiring loom to exit, four 3.5mm holes to use 3x20mm screws to attach the bezel, although I designed in countersink holes they need a tidy up with a countersink tool, there are no spacers inside so care must be taken to prevent overtightening, don't ask me how I know!