1 / 4
Hadley Telescope Snap-on Truss Tube Shroud — zdjęcie 1
1 / 4

Hadley Telescope Snap-on Truss Tube Shroud

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wrap your Hadley with a snap-on Truss Shroud. Requires no disassembly or modifications to your existing scope.

Ocena
5 / 5
Polubienia
27
Pobrania
138
Wydruki
2
Wyświetlenia
664
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

After melting a couple of sun filters, I decided that I needed a truss shroud for my Hadley. I wanted something easy to add to and remove from my scope, light-weight, effective and nice looking.

I designed a snap-on shroud section that fits neatly and snug around the trusses and creates a nice, clean tube.

The model is for a single snap-on section that is 100mm in length. I printed six of these plus a custom length to fill the final gap. You can create whatever lengths you need by scaling in the Z-axis.

  • Hatchbox Silk Black PLA
  • .2mm Layer Height
  • 15% Grid Infill
  • No Supports Needed

NOTE: This model is designed for the 1/2 inch (Imperial) rod diameter. That is equivalent to 12.7 mm so they might be a smidge loose on 12mm metric rods.